Software WinISL
- Configuration tool for ISL safety light barrier
- For ISL-8000
Terms of use
WinISM may be used at no cost for owners of Pantron series ISL photoelectric systems. You can read and modify user settings, watch device states and perform diagnostic tests. Please follow the ISL operating instructions. There is no guarantee for the correctness for the device states displayed by WinISL. The displays and switching outputs of the ISL device are decisive.
Install
1. Install the USB driver
WinISL needs the FT232R USB UART VCP driver from Future Technology Devices International Ltd (FTDI). The driver emulates a COM-port (RS232) on your system.
The most convenient way to install the driver is to execute the included setup file CDM 2.04.16.exe
Install the driver before you connect the interface box for the first time. The driver has to be installed only once.
For more information regarding driver updates, drivers for other Windows operating systems, alternate install methods and uninstalling please visit ftdichip.com/Drivers/VCP.htm
If you already have any version of the VCP driver installed, you may also use this.
2. Install WinISL
There is no setup program for WinISL, as it doesn't really need one. Installation is done by simply copying the supplied files. Extract the complete contents of the ZIP-file into a directory of your choice (suggested \Program Files\WinISL or any other folder outside of Program Files).
WinISL will create a .ini file on the first start for program setting storage purposes. WinISL will not create entries into your operating systems registry. WinISL needs no Internet access, no JAVA, no DirectX and no .NET Framework.
Warning
The minus terminal of the ISL device supply voltage is internally connected to
the GND (ground) pin of the USB port. Make sure that there is no different voltage between the 24V DC minus supply and your PCs frame ground.
Specially for laptop computers make sure to use a galvanic isolated AC adaptor or run the computer on battery. If your AC adaptor has a 3 pin mains connector, make sure that none of the pins, specially the protective ground terminal, is connected to the DC output.
If you are not sure, do not connect the ISL device to your computer! Pantron Instruments excludes all warranties for damages due to electric stray currents!
Uninstall
Remove the distributed files and the WinISM.ini file. You may also remove the device settings file you created using WinISL (*.set files)
System requirements
- WindowsNT, or newer.
- One USB port available.
- The FTDI VCP driver matching your operating system
Updates
If you receive the following message: "Found device with newer software version. You may check for updates of WinISL", you may download the current version of WinISL. Future versions of WinISL possibly may not support ISL devices with older software versions. You may keep a copy of any older version of WinISL, if you own older devices.
Download
 |
