ISG-N127

Highlights

Single channel opto sensor
Detection range up to 55 m (180 ft)
Manual sensitivity setting
Permanent sensor-control
Transistor output NPN / PNP
Alarm output
4 frequency settings
2 level settings
Light/dark switching

Product Description

The device ISG-N127 is equipped with microprocessor-based technology. It is equipped with features that normally can only be found in automatic or multiplex amplifiers. Every error caused by transmitter and receiver wiring is reported immediately by the permanent sensor-control. The 4-fold frequency change-over is useful to decouple nearby light barriers. Two level settings allow an adjustment to be made to compensate for distance and for different operating conditions. By the use of dark switching, it is possible to reverse the switching behavior of the output. The alarm output indicates sensor errors as well as decreased visual contact caused by contamination or misalignment. Wear-free transistor outputs ensure high switching sequences and reliable continuous operation.

Technical Specifications

Number of channels	1
Range (using transmitter ITL combined with receiver IRL / IRH)	10 m / 20 m (33 ft / 66 ft)
Range (using transmitter ITH combined with receiver IRL / IRH)	20 m / 35 m (66 ft / 115 ft)
Range (using transmitter ITA combined with receiver IRL / IRH)	35 m / 55 m (115 ft / 180 ft)
Switching frequencies	50 Hz /10 Hz
Power consumption	5 VA
Switching output	Transistor PNP / NPN 100 mA, 30 V DC
Alarm output, DC-supply	PNP / NPN 100 mA, 30 V DC
Alarm output, AC-supply	NPN 100 mA, 30 V DC
Connection	11-pin DIN-plug
Supply voltage	230 V AC / 115 V AC / 24 V AC / 24 V DC