ISM-8800
Highlights
- 8-channel opto sensor
- Tailored to operate in car washes
- 2 manual operating modes
- 4 automatic operating modes
- Light/dark switching
- Light curtain function
- Master/Slave operation
- Sensor-control
- Test function and diagnostic
- Analog output
- Alarm output and sensor error output
- Test input
- LCD-Display
- PC-Interface
Product Description
Eight-channel multiplexed system with manual and automatic operation modes. This system is extremely dirt resistant and specially tailored to operate in car washes.
Menu-driven setup allows individual parameter settings for each channel:
- Automatic mode with 4 levels, manual mode with 2 levels
- Manual gain setting
- Light/dark switching
- Switching delay (on/off) 0-60 s
Sensor error monitoring shows error messages on the LCD display during normal operation. Info screens for each channel indicate the current settings and performance. Detailed performance and error information are indicated in diagnostic mode.
The Master/Slave operation makes it possible to synchronize several amplifiers of the series ISM-4xxx and ISM-8xxx. This function is essential due to strong reflections if more than one amplifier is used in a car wash.
Test input for functional test by external test equipment. The PC-Interface allows the user to connect the ISM device to a computer and use the WinISM software to display device functions and set all device parameters.
LED indicators for output signal and sensor error per each channel. Alarm indicator, alarm and error output. Electronic output stage (PhotoMOS). Plug connector version for easy installation.
Technical Specifications
Number of channels | 8 |
Multiplex-speed | 18 ms |
Range (using transmitter ITL combined with receiver IRL / IRH) | 10 m / 15 m (33 ft / 49 ft) |
Range (using transmitter ITH combined with receiver IRL / IRH) | 12 m / 25 m (39 ft / 82 ft) |
Range (using transmitter ITA combined with receiver IRL / IRH) | 25 m / 60 m (82 ft / 197 ft) |
Operating modes | 2 manual / 4 automatic |
Transmit frequency | 4 kHz |
Switching outputs | 60 V AC / DC short-circuit proof |
Response time | 36 ms |
Alarm output | PNP 24 V, 100 mA |
Error output | PNP 24 V, 100 mA |
Analog output | 0...10 V |
Test input | 24 V DC |
Interface | RS232 * |
Supply voltage | 24 V DC |
*) The RS232-Interface is exclusively suitable for the communication between the ISM-8800 and the software WinISM. The implementation of custom-built protocols are available upon request.
Ordering Information
Version | Order code |
Plug connection | ISM-8800/24VDC |
Downloads
Suitable sensor heads
For use of these opto sensors in car wash applications the following sensor heads are recommended.
- transmitter IT-P10HP-5, IT-P10HP-15
- receiver IR-P10-5, IR-P10-15